Page Comparison

• 21.3 Audit Management Release Notes

• 21.3 Chemical Release Notes

• 21.3 Foundation Release Notes

• 21.3 IMS Release Notes

• 21.3 Industrial Hygiene Release Notes

• 21.3 LMS Release Notes

• 21.3 Occ Health Release Notes

• 21.3 Permit Management Release Notes

IMS Insight Stories

• PMP-81414 - As an end user I want to generate Country Metrics report from Insight

• PMP-80416 - As a System Admin I want to identify employee pay rate type for injured/involved employee

• PMP-79780 - Configure the Rate Calculation Formulae to support Indian StandardsGoal

• PMP-79775 - As an end user I would like to capture and share Lessons Learnt from an Incident to other Facilities

• PMP-79773 - As an end user I want to capture Date and Time of Medical Treatment in Claim Form

• PMP-79759 - As an end user I want to see RCA completion date field in Cognos

• PMP-79653 - As an end user want to see Date Determined as Recordable in Cognos

• PMP-79631 - As an end user I want to view Policy Effective dates for GL cost and Notes in Cognos

• PMP-81642 - As an end user I want to view fraction of days lost for Medical Treatment in Cognos

• PMP-81641 - As an end user I want to view Employee outside activity detail in Cognos

PMP-81414 -- As an end user I want to generate Country Metrics report from Insight

• Goal – To have Country Metrics in Cognos Model

Country Metrics have been added in following folder

Incident Management Measures - > Injury Illness and Near Miss -> Country Metrics

Back to top

PMP-80416 - As a System Admin I want to identify employee pay rate type for injured/involved employee

PD Team - UserStory - PMP-79155

• Goal - Add a new field “Pay Rate Type“ in "Employee / Individual Details" section

Pay Rate Type field can be found at Incident Details -> Common Details -> Employee Details

Back to top

PMP-79780 - Configure the Rate Calculation Formulae to support Indian StandardsGoal

PD Team - UserStory - PMP-56113

• Goal - Make rate calculation formula configurable

Considering the Rate Multiplier from customsetting in cognos and updated required Rates to sync with application, we did changes in all Rate metrics and It is applicable for Country Metrics also

Note:-

• We are calculating Rates based on customsetting only

• We will not have both in Cognos

• We didn’t apply for Custom specific metrics

• We did the changes in Standard Reports

 “Rate Multiplier” gives the value of customsetting so that we will know the Rate Multiplier in Cognos

Back to top

PMP-79775 - As an end user I would like to capture and share Lessons Learnt from an Incident to other Facilities

PD Team - UserStory - PMP-79526

Goal

• Provide a feature to capture and share lessons learned

Lessons Learned Statement section has been added under Investigation section

Back to top

Anchor
PMP-79773 PMP-79773

PMP-79773 - As an end user I want to capture Date and Time of Medical Treatment in Claim Form

PD Team - UserStory - PMP-78586

Goal

• Provide option to capture Date and Time of Medical Treatment provide to employee

Date and Time Of Medical Treatment fields have been added in below places

• Injury/Illness Incident Details -> Medical Details

• Claims Details -> Workers Compensation Claims -> Claim Form Details -> Medical Information

Back to top

PMP-79759 - As an end user I want to see RCA completion date field in Cognos

PD Team - UserStory - PMP-61668

Goal

• Capture RCA completion date in Investigation section

Root Cause Completed Date field has been added under Investigation Details -> Final Root Cause Statement

Back to top

PMP-79653 - As an end user want to see Date Determined as Recordable in Cognos

PD Team - UserStory - PMP-79633

• Goal - As of now system does show the date when the 1st recordable case was created for an Incident. In some cases it becomes important to know the difference between the actual date when Incident progressed to recordable classification and when was the actual entry made in the system

Date Determined as Recordable filed has been added under Case Management Details -> Classification Of Case

Back to top

PMP-79631 - As an end user I want to view Policy Effective dates for GL cost and Notes in Cognos

Added following fields under Claims Details -> General Liability Claims -> TPA Details -> TPA Summary Details

• Policy Effective Begin Date

• Policy Effective End Date

Back to top

PMP-81642 - As an end user I want to view fraction of days lost for Medical Treatment in Cognos

PD Story - PMP-78099

Goal

• Capture half day lost in case of Medical Treatment Case where employees goes for treatment but reports back to work in half day

Man Day Lost has been added under Case Management Details -> Case Progression Tracking

Back to top

PMP-81641 - As an end user I want to view Employee outside activity detail in Cognos

PD Story - PMP-78100

Goal

• Provide ability to capture if employee was doing a work activity or commuting to/from work when incident occurred outside premises

What Activity Was The Employee Engaged In At The Time Of Incident has been added under Incident Details -> Common Details -> General Incident Details

Back to top

Audit Management Insight Stories Back to Modules

• PMP-76167 Ability to view Audits "By Contractor" in Cognos

• PMP-79771 As an Admin I want to see question comment related data points in Cognos

PMP-76167 Ability to view Audits "By Contractor" in Cognos

If Audit Sub Type is selected as ‘Contractor’ the Contractor details will be available in “Selected Contractor ID and Selected Contractor(s)” fields

Audit Management Package > Audit Program Details > Program Details

PMP-79771 As an Admin I want to see question comment related data points in Cognos

Using this below data item we can get the information for which Answer Types the comment is mandatory for the audit program.

Audit Management Package > Audit Program Details > Program Details > Advanced Details

Audit Progress measure included in the Cognos model

Audit Management Package > Audit Measures > Audit Progress

Back to Audit Management

21.3 Foundation Stories Back to Modules

• PMP-79267 Add employee pay type field to employee details

PMP-79267 Add employee pay type field to employee details

Included Pay Rate Type to define the employee Pay Rate Type

Foundation Package > Setup > Enterprise Setup > Employees > Employee Information > Employment Information

Back to Foundation

Anchor
ChemicalManagementStories ChemicalManagementStories

21.3 Chemical Management Stories Back to Modules

• PMP-79872 Provision of linkage and carrying over of use information from the chemical approval to the manage chemicals screens

Anchor
PMP-79872 PMP-79872

PMP-79872 Provision of linkage and carrying over of use information from the chemical approval to the manage chemicals screens

Below mentioned details pushed from Chemical Approval Request to Manage Chemicals

Chemical Management Package > Chemical Management > Manage Chemicals > Chemical Information > Details > Usage Information

Back to Chemical Management

Anchor
LearningManagementStories LearningManagementStories

21.3 Learning Management Stories Back to Modules

• PMP-79868 Add additional Dropdown value to the Outcome Field

Anchor
PMP-79868 PMP-79868

PMP-79868 Add additional Dropdown value to the Outcome Field

New Outcome value "Attended" will be appear in the below Outcome field

Learning Management Package > Outcome > Outcome Details

Image RemovedImage Added

Back to Learning Management

Anchor
OccupationalHealthStories OccupationalHealthStories

21.3 Occupational Health Stories Back to Modules

• PMP-79886 Multiple Records - Fit Testing

Anchor
PMP-79886 PMP-79886

PMP-79886 Multiple Records - Fit Testing

Now user can enter multiple Fit Testing Details and that information will be available under Fit Testing Details.

Occupational Health Package > Encounter Information > Fit Testing > Fit Testing Details

Image RemovedImage Added

Back to Occupational Health

Anchor
PermitManagementStories PermitManagementStories

21.3 Permit Stories Back to Modules

• PMP-80356 As an administrator, I would like to assign tasks to the location User Group

Anchor
PMP-80356 PMP-80356

PMP-80356 As an administrator, I would like to assign tasks to the location User Group

Now user can assign the tasks to the location user group, and that information will be available in Assigned To and Primary Owner/Group

Permit Management Package > Permit Details > Tasks

Back to Permit Management

Anchor
IndustrialHygieneStories IndustrialHygieneStories

Back to Modules

21.3 Industrial Hygiene Stories

• PMP-78802 The mixture result category to get store in the table

• PMP-79849 Create Work Area / Function in Location Set up

• PMP-79851 Job Classification in Location Set up

• PMP-79865 BI - Indoor Air Quality Sample

Anchor
PMP-78802 PMP-78802

PMP-78802 The mixture result category to get store in the table

Now Category in Mixture Result information will be available in Mixture Result Category

Industrial Hygiene Package > Planned Sample > Sample Result Information > Mixture Result

Back to top

Anchor
PMP-79849 PMP-79849

PMP-79849 Create Work Area / Function in Location Set up

Work Area/Function is now available in Location Setup

Industrial Hygiene Package > Look Up and Set Up > Enterprise/Location Set Up > Work Area

Back to top

Anchor
PMP-79851 PMP-79851

PMP-79851 Job Classification in Location Set up

Job Classification is now available in Location Setup

Industrial Hygiene Package > Look Up and Set Up > Enterprise/Location Set Up > Job Classification

Back to top

Anchor
PMP-79865 PMP-79865

PMP-79865 BI - Indoor Air Quality Sample

A Result section is included for the Sample Type Indoor Air Quality Sample

Industrial Hygiene Package >Planned Sample > Planned Sample Result > Indoor Air Quality Sample

Back to Industrial Hygiene