New and Improved Features

PMP-42669      Change on Non –Detects with Detection code

PMP-41915      Create Custom Setting To Make Sample ID Mandatory/Non-Mandatory Configurable

PMP-41763      Change in Calculation for Exposure time noise

PMP-41755      Ungroup Edit Closed Assessment Permission for QEA

PMP-41415      New field Survey in Sample Detail

PMP-40759      Noise Equipment calibration field made configurable as mandatory or non-mandatory

PMP-40641      Defaulting Analytical Method to No

PMP-40607      QRA Associated Stressors Ergonomics Show Hide Configurable

PMP-40493      Default the Unit of Measurement for the Sample Results screen

PMP-40438      Default Monitoring Equipment defaulted to "Borrowed from other site"

PMP-40148      Introduce module wise Dashboard manager permissions

PMP-39621      Create New IH Physical Sample Type - Lighting

PMP-39611      Internal Qualitative Exposure Assessment process

PMP-39121      Employee Notification Letter should display all OEL Sources: ACGIH, State/Province, Country

PMP-39120      In Create New Sample Plan Screen change action level drop down to 50% OEL .Sample Record to be defaulted to the Baseline / Routine

PMP-36571     Would you like to capture Environment Requirement –Business Rule


PMP-42669     Change on Non –Detects with Detection code

In the enhanced state, When  Detection code is selected as  "<" then  Category  will replace the "Below Action Level" (Sample Result is < 10% OEL value) with "Non - Detectable". This is applicable to Air Monitoring Pump and Passive Monitor ,Direct Monitoring, both options (for TWA and STEL). Its applicable to COC lab feed both LIMS and System.

back to top 

PMP-41915     Create Custom Setting To Make Sample ID Mandatory/Non-Mandatory Configurable

In the enhanced state, Sample ID field can be configured as mandatory/Non-Mandatory based upon requirement. 


back to top 

PMP-41763     Change in Calculation for Exposure time noise

In the enhanced state, a change in calculation for Exposure Time Noise has been made. The following are the details of it. 


back to top 

PMP-41755     Ungroup Edit Closed Assessment Permission for QEA

In the enhanced state, Edit closed assessment permission from the Edit Assessment permission is ungrouped



back to top 

 

PMP-41415     New field Survey in Sample Detail


In the enhanced state, a new field Survey Name has been added. 


IH Query Report: Filter

 



IH Query Report: View Report


 IH Summary:

                                       


back to top 

PMP-40759     Noise Equipment calibration field made configurable as mandatory or non-mandatory

In the nehanced stae, Date of Last Factory/ Traceable Calibration and Factory/ Traceable Calibration Valid Until made configurable as mandatory or non-mandatory. 


back to top 

PMP-40641     Defaulting Analytical Method to No

In the enhanced application, default analytical method field is made configurable. On page load its configurable to select the default value as yes or no



back to top 

PMP-40607     QRA Associated Stressors Ergonomics Show Hide Configurable

In the enhanced state, When adding a stressor to the QRA,Ergonomics is made a show/hide configuration. 



back to top

PMP-40493     Default the Unit of Measurement for the Sample Results screen

In the enhanced application, Units for Lab amount ,Lab concentration and OEL would be configurable. 



back to top

PMP-40438     Default Monitoring Equipment defaulted to "Borrowed from other site"

In the enhanced application, Moitnoring Equipment owned b field has been made configurable. Default vaule wll shown in the top of the list. 


 

back to top

PMP-40148     Introduce module wise Dashboard manager permissions

In the enhanced  state, module wise Dashboard Manager permissions option has been configured. 



back to top

PMP-39621     Create New IH Physical Sample Type - Lighting

In the enhanced state, a new IH Physical Sample Type - Lighting has been created. 














back to top

PMP-39611     Internal Qualitative Exposure Assessment process

The following changes have been made in the Qualitative Exposure assessment Process in the enhanced application. 


-Hazard Rating X Health Effect Rating

-Exposure Rating X Airborne Potential Rating

-Frequency X Frequency and Duration Rating

-Task Duration X Exposure Control Rating

-Dispersion X Exposure Potential Certainty Rating

Noise exposure TWA <75 dBA - 1
Noise exposure TWA 75 –79.9 dBA - 2

Noise exposure TWA 80 –84.9 dBA - 3
Noise exposure TWA 85 –89.9 dBA - 4
Noise exposure TWA 90 dBA and above - 5

Drop down to show value: Partial control and No Control with score value as 1

On selecting partial control: Formula in formula builder X 50% = Score >Associated stressor Dashboard

No Control: Formula in formula builder X 25%= Score >Associated stressor Dashboard





back to top

PMP-39121     Employee Notification Letter should display all OEL Sources: ACGIH, State/Province, Country

In the enhanced state OEL Source in Employee Notification Letter  will appear based on priority.

Priority : 1.Internal  Regulatory State  3.Regulatory Country   4.ACIGH

If the value as per priority is missing then it will take the next value



back to top

PMP-39120     In Create New Sample Plan Screen change action level drop down to 50% OEL .Sample Record to be defaulted to the Baseline / Routine

In the enhanced state, in sample plan record detail, ” > Action Level" will be renamed to ">50% OEL". Also, Export QRA to New Sample Plan Baseline/Prior result field will show default value  as "--select--" but for Chevron it would show Baseline/Routine. 





For Chevron Only : 

back to top 


PMP- 36571     Would you like to capture Environment Requirement –Business Rule

In the enhanced application, in the field Would you like to capture environment requirement in Sample activity : 



back to top