New and Improved Features

PMP-42669 – Change on Non –Detects with Detection code

In the enhanced state, When  Detection code is selected as  "<" then  Category  will replace the "Below Action Level" (Sample Result is < 10% OEL value) with "Non - Detectable". This is applicable to Air Monitoring Pump and Passive Monitor ,Direct Monitoring, both options (for TWA and STEL). Its applicable to COC lab feed both LIMS and System.

PMP-41915 Create Custom Setting To Make Sample ID Mandatory/Non-Mandatory Configurable

In the enhanced state, Sample ID field can be configured as mandatory/Non-Mandatory based upon requirement. 

PMP-41763 Change in Calculation for Exposure time noise

In the enhanced state, a change in calculation for Exposure Time Noise has been made. The following are the details of it. 

• Sample result will now be calculated based on exposure time for hazard type Noise
• Shift length will be swapped with exposure time in minutes for result calculation
• In sample activity shift length,analyte oel adjustment, was there potential exposure, override calculated time will be hidden
• Default 8 Hours for Shift Length
• Similar to chemical new field "Total Employee Exposure Time” having two drop downs (Hours and Minutes) which is going to calculate the total exposure time in minutes.
• Drop downs to be clear for Hours and Minutes the individual was exposed.
• So the user will select the employee was exposure for 8 hours and 0 minutes instead of an 8 hour shift.
• We will then show the calculated Total Exposure Time in a greyed out field . So in the field below, it should display 480 minutes.
• The hours will be in single digits from 0 to 23 (i.e., 0, 1, 2, 3, and the minutes will be in single minute increments from 0 to 30 and then 5 minute increments from 30 to 55

PMP-41755 - Ungroup Edit Closed Assessment Permission for QEA

In the enhanced state, Edit closed assessment permission from the Edit Assessment permission is ungrouped

 PMP-41415:New field Survey in Sample Detail

In the enhanced state, a new field Survey Name has been added. 

• New text box under the Sample ID field “Survey Name".
• Field would be Show/hide configurable
• The survey field is of 50 characters long
• This field will allow alphanumeric and special characters
• Two different samples can have same survey name
• Will be applicable for Physical and Chemical samples
• Survey field will be visible in Planned Sample ,Diagnostic Sample, Copy Sample

IH Query Report: Filter

IH Query Report: View Report

 IH Summary:

PMP-40759: Noise Equipment calibration field made configurable as mandatory or non-mandatory

In the nehanced stae, Date of Last Factory/ Traceable Calibration and Factory/ Traceable Calibration Valid Until made configurable as mandatory or non-mandatory. 

PMP -40641 Defaulting Analytical Method to No

In the enhanced application, default analytical method field is made configurable. On page load its configurable to select the default value as yes or no

PMP-40607  : QRA Associated Stressors Ergonomics Show Hide Configurable

In the enhanced state, When adding a stressor to the QRA,Ergonomics is made a show/hide configuration. 

PMP-40493   Default the Unit of Measurement for the Sample Results screen

In the enhanced application, Units for Lab amount ,Lab concentration and OEL would be configurable. 

PMP-40438     Default Monitoring Equipment defaulted to "Borrowed from other site

In the enhanced application, Moitnoring Equipment owned b field has been made configurable. Default vaule wll shown in the top of the list. 

PMP-40148  Introduce module wise Dashboard manager permissions

In the enhanced  state, module wise Dashboard Manager permissions option has been configured. 

PMP -39621  Create New IH Physical Sample Type - Lighting

In the enhanced state, a new IH Physical Sample Type - Lighting has been created. 

PMP-39611   Internal Qualitative Exposure Assessment process

The following changes have been made in the Qualitative Exposure assessment Process in the enhanced application. 

• Fields in QRA renamed
• Current Field Name X Chevron Revised Name

-Hazard Rating X Health Effect Rating

-Exposure Rating X Airborne Potential Rating

-Frequency X Frequency and Duration Rating

-Task Duration X Exposure Control Rating

-Dispersion X Exposure Potential Certainty Rating

• Score value for Health affect rating

Noise exposure TWA <75 dBA - 1
Noise exposure TWA 75 –79.9 dBA - 2

Noise exposure TWA 80 –84.9 dBA - 3
Noise exposure TWA 85 –89.9 dBA - 4
Noise exposure TWA 90 dBA and above - 5

• Exposure rating – hidden. When Noise is selected, value associated with Airborne Potential Rating will be defaulted to “1 – Not Applicable”. and would have score value as 1
• Exposure Control Rating for Noise  - Values : Partial control and No Control

Drop down to show value: Partial control and No Control with score value as 1

On selecting partial control: Formula in formula builder X 50% = Score >Associated stressor Dashboard

No Control: Formula in formula builder X 25%= Score >Associated stressor Dashboard

PMP-39121  Employee Notification Letter should display all OEL Sources: ACGIH, State/Province, Country

In the enhanced state OEL Source in Employee Notification Letter