New and Improved Features
PMP-42669 – Change on Non –Detects with Detection code
In the enhanced state, When Detection code is selected as "<" then Category will replace the "Below Action Level" (Sample Result is < 10% OEL value) with "Non - Detectable". This is applicable to Air Monitoring Pump and Passive Monitor ,Direct Monitoring, both options (for TWA and STEL). Its applicable to COC lab feed both LIMS and System.
PMP-41915 Create Custom Setting To Make Sample ID Mandatory/Non-Mandatory Configurable
In the enhanced state, Sample ID field can be configured as mandatory/Non-Mandatory based upon requirement.
PMP-41763 Change in Calculation for Exposure time noise
...
- Sample result will now be calculated based on exposure time for hazard type Noise
- Shift length will be swapped with exposure time in minutes for result calculation
- In sample activity shift length,analyte oel adjustment, was there potential exposure, override calculated time will be hidden
- Default 8 Hours for Shift Length
- Similar to chemical new field "Total Employee Exposure Time” having two drop downs (Hours and Minutes) which is going to calculate the total exposure time in minutes.
- Drop downs to be clear for Hours and Minutes the individual was exposed.
- So the user will select the employee was exposure for 8 hours and 0 minutes instead of an 8 hour shift.
- We will then show the calculated Total Exposure Time in a greyed out field . So in the field below, it should display 480 minutes.
- The hours will be in single digits from 0 to 23 (i.e., 0, 1, 2, 3, and the minutes will be in single minute increments from 0 to 30 and then 5 minute increments from 30 to 55
PMP-41755 - Ungroup Edit Closed Assessment Permission for QEA
In the enhanced state, Edit closed assessment permission from the Edit Assessment permission is ungrouped
...
PMP-41415:New field Survey in Sample Detail
...
PMP-40759: Noise Equipment calibration field made configurable as mandatory or non-mandatory
In the nehanced stae, Date of Last Factory/ Traceable Calibration and Factory/ Traceable Calibration Valid Until made configurable as mandatory or non-mandatory.
PMP-40641 Defaulting Analytical Method to No
In the enhanced application, default analytical method field is made configurable. On page load its configurable to select the default value as yes or no
PMP-40607 : QRA Associated Stressors Ergonomics Show Hide Configurable
In the enhanced state, When adding a stressor to the QRA,Ergonomics is made a show/hide configuration.
PMP-40493 Default the Unit of Measurement for the Sample Results screen
In the enhanced application, Units for Lab amount ,Lab concentration and OEL would be configurable.
PMP-40438 Default Monitoring Equipment defaulted to "Borrowed from other site
In the enhanced application, Moitnoring Equipment owned b field has been made configurable. Default vaule wll shown in the top of the list.
PMP-40148 Introduce module wise Dashboard manager permissions
In the enhanced state, module wise Dashboard Manager permissions option has been configured.
PMP-39621 Create New IH Physical Sample Type - Lighting
In the enhanced state, a new IH Physical Sample Type - Lighting has been created.
PMP-39611 Internal Qualitative Exposure Assessment process
...
No Control: Formula in formula builder X 25%= Score >Associated stressor Dashboard
PMP-39121 Employee Notification Letter should display all OEL Sources: ACGIH, State/Province, Country
...