...
PMP-39121 Employee Notification Letter should display all OEL Sources: ACGIH, State/Province, Country
PMP-39120 In Create New Sample Plan Screen change action level drop down to 50% OEL .Sample Record to be defaulted to the Baseline / Routine
PMP-36571 Would you like to capture Environment Requirement –Business Rule
PMP-
...
42669 Change on Non –Detects with Detection code
In the enhanced state, When Detection code is selected as "<" then Category will replace the "Below Action Level" (Sample Result is < 10% OEL value) with "Non - Detectable". This is applicable to Air Monitoring Pump and Passive Monitor ,Direct Monitoring, both options (for TWA and STEL). Its applicable to COC lab feed both LIMS and System.
...
PMP-41915 Create 41915 Create Custom Setting To Make Sample ID Mandatory/Non-Mandatory Configurable
...
PMP-41763 Change 41763 Change in Calculation for Exposure time noise
...
- Sample result will now be calculated based on exposure time for hazard type Noise
- Shift length will be swapped with exposure time in minutes for result calculation
- In sample activity shift length,analyte oel adjustment, was there potential exposure, override calculated time will be hidden
- Default 8 Hours for Shift Length
- Similar to chemical new field "Total Employee Exposure Time” having two drop downs (Hours and Minutes) which is going to calculate the total exposure time in minutes.
- Drop downs to be clear for Hours and Minutes the individual was exposed.
- So the user will select the employee was exposure for 8 hours and 0 minutes instead of an 8 hour shift.
- We will then show the calculated Total Exposure Time in a greyed out field . So in the field below, it should display 480 minutes.
- The hours will be in single digits from 0 to 23 (i.e., 0, 1, 2, 3, and the minutes will be in single minute increments from 0 to 30 and then 5 minute increments from 30 to 55
PMP-
...
41755 Ungroup Edit Closed Assessment Permission for QEA
In the enhanced state, Edit closed assessment permission from the Edit Assessment permission is ungrouped
...
PMP-
...
41415 New field Survey in Sample Detail
In the enhanced state, a new field Survey Name has been added.
...
PMP-
...
40759 Noise Equipment calibration field made configurable as mandatory or non-mandatory
In the nehanced stae, Date of Last Factory/ Traceable Calibration and Factory/ Traceable Calibration Valid Until made configurable as mandatory or non-mandatory.
...
PMP-40641 Defaulting 40641 Defaulting Analytical Method to No
In the enhanced application, default analytical method field is made configurable. On page load its configurable to select the default value as yes or no
PMP-
...
40607 QRA Associated Stressors Ergonomics Show Hide Configurable
In the enhanced state, When adding a stressor to the QRA,Ergonomics is made a show/hide configuration.
...
PMP-40493 Default the Unit of Measurement for the Sample Results screen
...
PMP-40438 40438 Default Monitoring Equipment defaulted to "Borrowed from other site"
...
PMP-40148 Introduce 40148 Introduce module wise Dashboard manager permissions
...
PMP-39621 Create 39621 Create New IH Physical Sample Type - Lighting
...
PMP-39611 Internal Qualitative Exposure Assessment process
...
PMP-39121 Employee 39121 Employee Notification Letter should display all OEL Sources: ACGIH, State/Province, Country
In the enhanced state OEL Source in Employee Notification Letter Letter will appear based on priority.
Priority : 1.Internal Regulatory State 3.Regulatory Country 4.ACIGH
If the value as per priority is missing then it will take the next value
Image Added
PMP-39120 In Create New Sample Plan Screen change action level drop down to 50% OEL .Sample Record to be defaulted to the Baseline / Routine
In the enhanced state, in sample plan record detail, ” > Action Level" will be renamed to ">50% OEL". Also, Export QRA to New Sample Plan Baseline/Prior result field will show default value as "--select--" but for Chevron it would show Baseline/Routine.
Image Added
Image Added
Image Added
For Chevron Only :
Image Added
PMP- 36571 Would you like to capture Environment Requirement –Business Rule
In the enhanced application, in the field Would you like to capture environment requirement in Sample activity :
- On selecting No, environment section should not appear
- On selecting Yes, environment section should appear.
Image Added