Content Comparison

...

In the enhanced state, When  Detection code is selected as  "<" then  Category  will replace the "Below Action Level" (Sample Result is < 10% OEL value) with "Non - Detectable". This is applicable to Air Monitoring Pump and Passive Monitor ,Direct Monitoring, both options (for TWA and STEL). Its applicable to COC lab feed both LIMS and System.

back to top 

Anchor
PMP-41915 PMP-41915

PMP-41915     Create Custom Setting To Make Sample ID Mandatory/Non-Mandatory Configurable

In the enhanced state, Sample ID field can be configured as mandatory/Non-Mandatory based upon requirement. 

back to top 

Anchor
PMP-41763 PMP-41763

PMP-41763     Change in Calculation for Exposure time noise

...

• Sample result will now be calculated based on exposure time for hazard type Noise
• Shift length will be swapped with exposure time in minutes for result calculation
• In sample activity shift length,analyte oel adjustment, was there potential exposure, override calculated time will be hidden
• Default 8 Hours for Shift Length
• Similar to chemical new field "Total Employee Exposure Time” having two drop downs (Hours and Minutes) which is going to calculate the total exposure time in minutes.
• Drop downs to be clear for Hours and Minutes the individual was exposed.
• So the user will select the employee was exposure for 8 hours and 0 minutes instead of an 8 hour shift.
• We will then show the calculated Total Exposure Time in a greyed out field . So in the field below, it should display 480 minutes.
• The hours will be in single digits from 0 to 23 (i.e., 0, 1, 2, 3, and the minutes will be in single minute increments from 0 to 30 and then 5 minute increments from 30 to 55

back to top 

Anchor
PMP-41755 PMP-41755

PMP-41755     Ungroup Edit Closed Assessment Permission for QEA

In the enhanced state, Edit closed assessment permission from the Edit Assessment permission is ungrouped

back to top 

Anchor
PMP-41415 PMP-41415

PMP-41415     New field Survey in Sample Detail

...

back to top 

Anchor
PMP-40759 PMP-40759

PMP-40759     Noise Equipment calibration field made configurable as mandatory or non-mandatory

In the nehanced stae, Date of Last Factory/ Traceable Calibration and Factory/ Traceable Calibration Valid Until made configurable as mandatory or non-mandatory. 

back to top 

Anchor
PMP-40641 PMP-40641

PMP-40641     Defaulting Analytical Method to No

In the enhanced application, default analytical method field is made configurable. On page load its configurable to select the default value as yes or no

back to top 

Anchor
PMP-40607 PMP-40607

PMP-40607     QRA Associated Stressors Ergonomics Show Hide Configurable

In the enhanced state, When adding a stressor to the QRA,Ergonomics is made a show/hide configuration. 

back to top

Anchor
PMP-40493 PMP-40493

PMP-40493     Default the Unit of Measurement for the Sample Results screen

In the enhanced application, Units for Lab amount ,Lab concentration and OEL would be configurable. 

back to top

Anchor
PMP-40438 PMP-40438

PMP-40438     Default Monitoring Equipment defaulted to "Borrowed from other site"

In the enhanced application, Moitnoring Equipment owned b field has been made configurable. Default vaule wll shown in the top of the list. 

back to top

Anchor
PMP-40148 PMP-40148

PMP-40148     Introduce module wise Dashboard manager permissions

In the enhanced  state, module wise Dashboard Manager permissions option has been configured. 

back to top

Anchor
PMP-39621 PMP-39621

PMP-39621     Create New IH Physical Sample Type - Lighting

In the enhanced state, a new IH Physical Sample Type - Lighting has been created. 

back to top

Anchor
PMP-39611 PMP-39611

PMP-39611     Internal Qualitative Exposure Assessment process

...

No Control: Formula in formula builder X 25%= Score >Associated stressor Dashboard

back to top

Anchor
PMP-39121 PMP-39121

PMP-39121     Employee Notification Letter should display all OEL Sources: ACGIH, State/Province, Country

...

If the value as per priority is missing then it will take the next value

back to top

Anchor
PMP-39120 PMP-39120

PMP-39120     In Create New Sample Plan Screen change action level drop down to 50% OEL .Sample Record to be defaulted to the Baseline / Routine

In the enhanced state, in sample plan record detail, ” > Action Level" will be renamed to ">50% OEL". Also, Export QRA to New Sample Plan Baseline/Prior result field will show default value  as "--select--" but for Chevron it would show Baseline/Routine. 

For Chevron Only : 

back to top 

Anchor
PMP-36571 PMP-36571

PMP- 36571     Would you like to capture Environment Requirement –Business Rule

...

• On selecting No, environment section should not appear
• On selecting Yes, environment section should appear. 

back to top