Sample Equipment - Passive Monitor

Users will be able to create a Passive Monitor sample. 

Step-by-step Instructions:

1. Click on the Modules icon.
2. Click on the Industrial Hygiene menu item.
3. Click on the Create New Sample menu item.
   
   
   
   

4. Click on the Create Diagnostics Sample.

5. Select the Passive Monitoring under Sample Equipment. 
   
   
   
   

6. Complete the Sample Details.  (Refer to the Sample Details Information for more details.)

   • Complete the Location Information section.  (Refer to the Location Information Fields for more details.)
   • Complete the Employee Information section.  (Refer to the Employee Information Fields for more details.)
7. Click on the Save button.
   
   
   
   
   

   1. Sample Types	Description
      Planned Samples	A sample that belongs in a Sample plan. This can either be done for baseline/periodic. Planned Sample will receive credit against the Facility Sample Plan.
      Diagnostic Samples	Not tied to/counted against any Sample plans.
      Field Blank Samples	These are necessary for Chemical Samples and can also be created once a planned/diagnostic sample has been created.
      Copy Existing Sample	Allows user to make a copy of an already existing sample.

      
      

      Back to Top
      
      

   2. Sample Details Information

      • All required fields (*) must be completed in the 3 subsections in order to save the Sample Details 
      • Sample Information Section - Key Fields

        Fields	Description
        IH Log	Automatically generated by IH Module
        Sample ID	Field is mandatory and allows person to capture any unique information with the sample.
        Hazard Type	Has an impact of future sections of the application, so appropriate selection is necessary. Upon saving these selections, user will not be able to make any changes to the Hazard Type.
        Sample Equipment	The equipment selection will define additional information required as part of collecting the sample. Upon saving these selections, user will not be able to make any changes to the Hazard Type.
        Duration Type	This field will determine applicable Limit Value when comparing sample result.

      
      

      Back to Top

      Location Information Key Fields

      Field	Detail/Description
      Department	This is the department/area that is being sampled. This field is managed in the Location Profile.
      Work Area Task Job Title Task Classification	These fields are not required, but are available for pre-population for Planned Samples.

      Back to Top

   3. Employee Information Key Fields

      Field	Details/Description
      Personnel Type	There are 2 options for selection that will pull from a pre-populated list:  Employee Supervised Contract Employee If user selects Unsupervised Contract Employee, then the user will be required to enter the details for this personnel Type.
      Employee Name	Required field.
      Department	Refers to the department/area that the employee is affiliated.

      
      

      Back to Top

   
   

Field Information Table

Related articles

• Page:
  Finding out the configured Data source Name
• Page:
  Open Existing Data Source
• Page:
  Incident Severity For all other Incident Type
• Page:
  Incident Severity for Near Miss
• Page:
  Locking Audit