New and Improved Features

Product Level Change

/wiki/spaces/SP/pages/1516830890

PMP-64498 : Create Sample Forms in App Builder Ph1 Air Monitoring

Configurable

/wiki/spaces/PR/pages/3314548812

/wiki/spaces/PR/pages/2872606912

Product Level Change

PMP-81592 : IH Query Report in Mg/M3 & PPM units

Configurable: NA

Title: NA

Public/Private: NA

Default: NA

Existing System: The current system does not have the ability to generate the IH query report for all the stressors in PPM and MG/M3 units irrespective of the unit the sample result was saved in the system. 

Use Case / Purpose: To generate the IH query report for all the stressors in PPM and MG/M3 units irrespective of the unit in the sample result.

Enhanced System: 

The changes will be reflected in the below IH Query reports:

• IH Query Report - Air Monitoring Pump, Passive Monitor, Wipe Sample

• IH Query Report - Bulk Sample, Gravity Sample, Qualitative Wipe Samples, Continuous Operating Pump

• IH Query Report - Direct Monitoring, Direct Monitoring - Gases and Vapors, Direct Monitoring - Detector Tube, Direct Read Instrument

• IH Query Report Blank Sample

Impacts: IH Query report

Back to top

PMP-64498: IH: Create Sample Forms in App Builder Ph1 Air Monitoring

Configurable: NA

Title: NA

Public/Private: NA

Default: NA

Existing System: There is no option to create Noise, Air monitoring, and Passive monitoring Samples through the App Builder form for IH Module.

Use Case / Purpose: Sample Creation through App Builder Form

• Air Monitoring Sample Form
• Data pushed from App Builder to IH Module
• Forms Accessible through Mobile

Enhanced System: Allow users to

• Create Samples form in App builder to capture Air Monitoring monitoring Samples through the App builder form over mobile.

• Capture Sample data through the form and pushed to IH Module for further access and action.

Impacts: Form data can be pushed and accessed through IH Module.

Back to top

Configurable

PMP- 85088 : Lab Result Calculation

Configurable: Yes

Title: RequiredCalculationSampleResult

Public/Private: Private

Values : Yes = During Sample Result Calculation Sample result will be calculated as per the defined formula

               No = During Sample Result Calculation Sample result will be same the user provided lab concentration

Default: Yes

Existing System: Sample result Calculation for Lab result calculated as per the defined formula.

Use Case / Purpose: Sample result value will same as Lab Concentration value.

Enhanced System: Sample result will be same as Lab concentration

• Air Monitoring Pump, Passive Monitor

  • Lab Concentration = Sample Result

• Direct Monitoring

  • Sample Result Information Measured Results = Sample Result

• Direct Monitoring - Gases & Vapours

  • Sample Result Information values - TWA, STEL, MAX, MIN, Instantaneous, Ceiling = Sample Result

• Direct Monitoring - Detector Tube

  • Sample Result Information values - TWA, STEl, Instateneous, Ceiling = Sample Result

• Direct Read Instrument

  • Sample Result Information values-Measured results = Sample Result

Impacts: Above Sample Result, COC Import lab feed from Application, Lab Feed (LIMS)

Back to top

PMP-79917 :Add Containment Action Type in CAPA Action Item Type

Configurable: Yes

Title: NA

Public/Private: NA

Default: NA

Existing System: The current action item doesn't have a type that will indicate the action item has been created for an immediate/containment action. 

Use Case / Purpose: Adding the new action item type "Containment Action" to capture immediate actions.

Enhanced System: 

• New Action Item Type (Containment Action) has been added.

Impacts: Action Item

Back to top